September 02, 2026
Upcycling Vintage and Antique Quilts in Sewing - Some Practical Tips

We’ve explored some of the “whys” and “what ifs” of sewing with vintage quilts - and perhaps you find yourself ready to start your vintage quilt project, but unsure how! In this post, we’ll be offering a closer look at the journey of T+T team member Erica’s process of turning a family quilt top into a Loft Quilted Jacket, with plenty of helpful tips to help you along your journey, too. 

If you joined us for the last chapter of my Loft Quilted Jacket’s story, you heard the story of my great-grandmother’s quilt top collection, and the treasures we found within. Many of the quilt tops are in gorgeous condition, ready to be turned into blankets to finish their story…but sadly, a couple had seen some fairly significant damage. 

In talking as a family, we decided that turning these tops into useful quilted items other than blankets would be an appropriate next chapter of their story, which honors my great-grandmother’s legacy as a maker. (Just look at that skill…and all pieced by hand!)

Three vintage quilts lay softly over a brick wall, featuring a variety of colorful piecing, including small hexagons, large stars, and a wandering curved line design. The star quilt is the same one featured in the last blog post, which is being made into a Loft Quilted Jacket.

However, starting this project was not without its questions - the “how” of the thing felt a little intimidating, knowing the value of the pieces placed in my care. And really, finding a lot of specifically-helpful information was a bit challenging! So, I thought I’d document a bit of my process, in the hope that it will help provide you some inspiration on your sewing journey as well. 

A vintage quilt featuring star-shaped blocks is laid over the back of a wood bench, before being quilted and made into a Loft Quilted Jacket.

I started by doing a bit of digging, and consulting with our incredibly talented team here behind the scenes at Twig + Tale - advice from team members with background in museums and history proved invaluable! Here are some of the tips I found helpful: 

  • If quilts require washing, avoid using a modern washing machine, if possible. It is preferable to soak them in water and mild soap, and gently press the soapy water through the quilt rather than agitating it. At very least, if hand washing is not possible, opt for a delicate setting on your machine, very mild soap, and wash the quilt alone.

  • For extra caution, place a bedsheet underneath your quilt in the tub before soaking. This allows you to lift the quilt out at the end without placing undue stress on the fibers from the weight of the wet fabric. 

  • Make any needed repairs first, before cutting out your pattern. This may be aided by laying out your pattern on the quilt first, to see which damage can be avoided and which can’t. 

  • Use a cotton organza underlining to stabilize any damage without changing the look of the quilt too much. This is how museums prevent pieces from continuing to fall apart over time - this extra layer takes the stress of any pulling or friction away from the quilt itself. It also provides sturdy fabric to anchor any repairs to, while remaining see-through enough to let the design show through.

  • Make sure that any potentially weak spots are placed in low-wear areas. Avoid having repaired patches in the seams, or on the shoulders, elbows, or other high-friction areas.

In my case, since I am working with a quilt top, I found myself with a few extra options compared to working with a fully-quilted blanket, so here’s a look at what I chose to do. 

Close-up photo of a neatly folded quilt top featuring star motifs, while being held in a women's hands.

My quilt top wasn’t terribly dirty, and so I didn’t feel the need to wash it first-thing. It wasn’t something that had been used on a bed - it was unfinished and had just been stored carefully away.

I wanted to protect my quilt as best as possible while I worked on it, to avoid any exacerbation in the spots which were already damaged. So, before doing the actual quilting of the top to batting, I chose to stabilize my quilt top first, and then proceed. (This will make washing safer, too!)

A woman sits on a couch with a vintage star quilt laid out on her lap, stitching it by hand.

Since the back of the quilt top will be hidden inside my “quilt sandwich”, I didn’t have to worry about my stabilizer fabric showing. This being the case, I chose to attach it to a thrifted bedsheet instead of cotton organza, since it’s what I had that was white, on-hand, and sturdy yet lightweight. 

Rather than stitching “in the ditch”, I decided to make it a second opportunity to add decorative quilting - I made long running stitches by hand, just inside the perimeter of each star, in a color matching its fabric. Because I don’t have a quilt frame or hoop, my method of doing so was somewhat of a mix of a sashiko and rocking-stitch technique.

Close-up of a woman's hands stitching a red, white, blue and yellow star block on a quilt by hand.

Additionally, I laid out my pattern pieces on the quilt, to get an idea of where any damaged spots may be unavoidable. Fortunately, I was able to cut around the thinning + holes, but had any repairs had been needed, I would have done them through both the top and the bedsheet. This way, I would be best assured that the repairs were as secure as possible.

From there, I continued on as one typically would creating a quilt jacket, treating my repaired quilt top as a normal one. Chunks were cut out for each pattern piece with about a 10% margin, and quilted to my batting. This was completed by machine: partially as a timesaver, but also because I liked the juxtaposition with the hand stitching. Past meets present, just like this jacket’s story!

Of note, I could have just attached a backing here as well, but because I planned a separate lining for the coat anyway, I didn’t worry about it. If my batting were puffier, and likely to get caught up in my machine, I probably would have, but this thin cotton batting wasn’t too finicky. 

Close up of a vintage star quilt under the needle of a sewing machine - the bolder hand-stitching can be seen next to the machine quilting lines.

After quilting, I cut out my pattern pieces, and continued creating my Loft Quilted Jacket as per the tutorial: sewing my exterior from my quilted top + batting, and my lining from an upcycled cotton duvet, binding them all around the edges to finish them off. 

I couldn’t be more with this end result, and I hope you’ve enjoyed coming along for the journey. It is so heartwarming every time I wear my Loft Jacket…like a loving embrace across 4 generations. There are so many points where this story could have changed that would never have seen me connected to this quilt top, and I feel immeasurably blessed to have gotten to be a part of it, with what I hope will be an heirloom piece that continues to be treasured for generations to come. 

A woman wears a handmade quilt coat using the Loft Quilted Jacket pattern and a vintage star motif quilt. She is standing on a boardwalk surround by trees.

If you're interested in seeing more about my Loft, and some of the design decisions I made to help it best show off my great-grandmother's craftmanship, come on over to the Treehouse - I've shared all about it there.

A look at my Loft story!

Have you ever considered using a vintage blanket in a project? Or, do you have other exciting plans for your Loft Quilted Jacket? Whatever you make, we’d love to see! You can share them in our free Treehouse community, away from some of the chaos of social media at large - or join us in our Facebook chat group.

A Loft Quilted Jacket made from a vintage quilt top is laid over a wooden rail by a pond, overgrown with lilies. On the wooden rail, a simple graffiti heart has been painted.

Here's some additional quilt-curious content you may enjoy: 

 

Featuring photos by Erica Wright